1 / 6
Bench Dog Doggy dog dogs Wood Working Wisdom — zdjęcie 1
1 / 6

Bench Dog Doggy dog dogs Wood Working Wisdom

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just had some need for bench dogs and think the ones here on thingiverse are too much plasticy :) Here is my Wood´n…

Ocena
0 / 5
Polubienia
55
Pobrania
161
Wydruki
0
Wyświetlenia
1820
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Just had some need for bench dogs and think the ones here on thingiverse are too much plasticy :)

Here is my Wood´n plastic Solution. As you need these for woodworking you should be able to make them yourself ,-)

Simply pressfit a 20mm wooden rod inside. If this is too loose for you glue them together or use a screw to connect wood n plastic.

Since the dogs here are quite new I cant give you long term experiences about their strength yet. So make your own experiments!

There are plenty more forms you can create with this Idea. So tell me your favorite form or remix it yourself!

You might need to sand the rods down a little to have a nice fit into your workbench 20mm holes. Or use Metal instead of wood.

Have fun :)

Print instructions

Unassociated tags: bench dog

Category: Tools Summary

Just had some need for bench dogs and think the ones here on thingiverse are too much plasticy :)

Here is my Wood´n plastic Solution. As you need these for woodworking you should be able to make them yourself ,-)

Simply pressfit a 20mm wooden rod inside. If this is too loose for you glue them together or use a screw to connect wood n plastic.

Since the dogs here are quite new I cant give you long term experiences about their strength yet. So make your own experiments!

There are plenty more forms you can create with this Idea. So tell me your favorite form or remix it yourself!

You might need to sand the rods down a little to have a nice fit into your workbench 20mm holes. Or use Metal instead of wood.

Have fun :)

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

</div>Rafts:

No

Supports:

Yes

</div>Resolution:

0.2

Infill:

40%

</div>
Filament:
[
Prusament Prusament PETG ] Blü

Tagi