1 / 4
Neptune 3 Pro - Filament Guide with PTFE tube - for upgraded 2x5015 Cooling
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved filament path with PTFE tube. Remixed for upgraded 2x5015 fan cooling shroud.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 881
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (24)Powiązane
I remixed the design from BeardedSwede to be able to fit when using upgraded dual 5015 cooling. It just uses a short piece of ptfe tube to feed the filament nicely centered into the extruder. For mounting you need 1x M3x16 and 1x M3x20 screw.
The fan duct I use and can recommend is the: “Neptune 3 Pro Open Face Dual 5015 Fan Duct - v2” made by HamXSlamwich.