1 / 2
SainSmart Genmitsu 3018 PROVer Braces for KABA Acrylic Desktop CNC Enclosure — zdjęcie 1
1 / 2

SainSmart Genmitsu 3018 PROVer Braces for KABA Acrylic Desktop CNC Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These braces center your SainSmart Genmitsu 3018 PROVer CNC Router nicely in the KABA Acrylic Enclosure

Ocena
5 / 5
Polubienia
9
Pobrania
53
Wydruki
1
Wyświetlenia
1237
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These braces are mounted with T-nuts onto the 2020 extrusion into the corners of the enclosure, and then you can place your CNC router's feets into the holes of the braces.

Your CNC router will be centered, and you can even (carefully) lift up the enclosure and the CNC router along with it - if you print them sturdy enough, and preferably in PETG.

You'll need to print 2 of each, and need 2 T-nuts and 2 M5x10 bolts per brace.

Tagi