1 / 2
Brackets for Home Depot Shelving racks
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brackets to attach 2x4 to end pieces of Husky model 4990
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (26)Powiązane
I wanted to mount some stuff on the ends of my shelving racks. These brackets lock into the existing openings and attach to a 2x4. In my case I use this to store clamps.
Three files:
- LeftBracket.3mf - original export of left side bracket from Fusion
- RightBracket.3mf - same for right bracket
- LargeRackBrackets.3mf - PrusaSlicer project with supports enabled. Worked like a champ with Hatchbox PLA
- LeftNarrow.3mf - same concept, different size for ¾"x5.5" plywood
- RightNarrow.3mf - right side, ¾"x5.5"
- NarrowBrackets.3mf - PrusaSlicer project as I printed it