Cap 22mm I.D.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
22mm I.D. 24 O.D. 25mm tall with a small chamfer. Have printed with PLA and ASA.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Received a ¾ drill bit 12 inches long but shipper didn't have any caps on it's tube. I saw another already on here however, I haven't had the best luck with .3mf. Being brand new to Fusion 360 I made my own. The Cap is modeled to be 2mm thick on the bottom and 1 mm thick on the walls, 22mm Inside diameter, 24mm Outside diameter, and 25mm tall with a small chamfer. After actually printing, my cheap calipers show 21.7mm I.D. but they serve their purpose. I have done a test print in PLA Silk, and printed 2 caps in ASA for actual use. I can Imagine several other needs for them In other filaments as well like TPU. So hopefully this .stl helps someone.