Bauer Belt Sander to 1-1/4 vacuum hose attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a 45 deg. vacuum/dust extractor 1-1/4 in adapter for my Bauer belt sander to replace the stock bag (does…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I needed a 45 deg. vacuum/dust extractor 1-1/4 in adapter for my Bauer belt sander to replace the stock bag (does nothing but throw dust in the air). Everything fits snug and works perfectly. The port to the belt sander is ~30.75 mm diameter and fits snug on the belt sander but still allows some slight rotation if need be. The port to the vacuum hose is ~30.50 mm and fits nice and snug on my 1-1/4 hose end. I've attached the solidworks file if you want to modify to fit your setup.
Print Settings
Printer Brand:
FlashForge
Printer:
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2 mm
Infill:
50%
Filament:
Sun abs
Notes:
Print with the shorter, belt sander side down and you won't need any supports.
Category: Machine Tools
