SodaStream Glass Bottle Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When washing your sodastream glass bottles, leave them to dry in this holder, which fits both the bottle and the lid.
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 431
- Wydruki
- 8
- Wyświetlenia
- 2902
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
When washing your sodastream glass bottles, leave them to dry in this holder, which fits both the bottle and the lid. Furthermore it features a removeable dripping tray.
Print instructions
Models
These models can all be printed in any rigid material.
Base - Is the main body of the holder. this can be printed with any layer height, but keep the seems in the rear to make a nice smooth front.
Hole 1,2 & 3 - are the three brims that fit the holes, this is made in order to hide any bad edges from printing the base, these are simply pressed in place or glued in. It might however be necessary to cut some of the overhang off first, to make them fit the hole. print these at 0.15mm layer height or less.
Tray - The tray fits in the bottom of the base and catches all the drops from the bottles, it can always be removed for cleaning. This can be printed in any material.
When printing the tray remember to set the solid top layers to 0. Then choose an infill you like and an infill density, i chose 10% honeycomb infill.
Happy Printing! and don't forget to upload a picture of your results.