Screw Box with sliding Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My design for a Screw-Organizer with 24-Slots. The slots all have chamfered edges to make fishing out screws easy.
- Ocena
- 4,889 / 5
- Polubienia
- 162
- Pobrania
- 1134
- Wydruki
- 11
- Wyświetlenia
- 3347
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this box, because the screw-set i ordered came with a really crappy one, of which the sliders kept falling out so the screws all mixed.
My design features 28 slots which all have chamfered edges to make getting a screw as easy as possible.
The tolerances on this model are quite tight so you might need to do minor sanding to get the lid to fit properly. Normally it should be enough to just slide it in and out of the box 2-3 times until it runs smoothly (the first time it will probaply be a little hard to get it in).
If you decide to print it for yourself I would really appreciate if you upload your make :)