Artemis I mission logo - multi color possible

The official logo of the NASA Artemis I mission to the moon.

Made for using multible colors, but can also be printed as a single color version.

The flat single color version can be found here:
https://www.prusaprinters.org/de/prints/55164-artemis-i-mission-logo-flat-single-color-version

Print instructions

Multi color version is made for 0.2 mm layer height and 3 layers each color.
Set the changes as follows:

layer height = 0.2 (3 layers per color)

1. black = 0.6 mm
2. white = 1.2 mm
3. lightest gray = 1.8 mm
4. dark gray = 2.4 mm
5. gray = 3.0 mm
6. light gray = 3.6 mm
7. blue = 4.2 mm
8. red = 4.8 mm
9. orange = 5.4 mm

******************************************************

Update 22-02-2021:

After some feedback I re-worked the logo so that each color now has min. 5 layers.
There should be no color-mixing anymore.
Use file *V4.stl.

For filament changes use the following heights:

1. black = 1.2 mm
2. white = 2.2 mm
3. lightest gray = 3.2 mm
4. dark gray = 4.2 mm
5. gray = 5.2 mm
6. light gray = 6.2 mm
7. blue = 7.2 mm
8. red = 8.2 mm
9. orange = 9.2 mm

I have also added the Fusion file so you can do changes for yourself.