1 / 3
5kg Spool roll holder (updated to wide rim twin bearings)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5kgs Bulk spool roll holder with bearings to mount to any surface and width.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 71
- Wydruki
- 2
- Wyświetlenia
- 656
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (0)Kolekcje (13)Powiązane
Updated 20/1/26
New File has wider section for dual bearings to allow for wide cheeks on the larger spools
Extra parts:
use 4 skate bearings per dog bone. Total 8 for twin bones.
Extra longer 8mm bolts, make 8mm longer to suit over BOM below

Bulk 5kgs any width roll holder with bearings
Ideal for 250mm and larger diameter spools
Use:
Print out a pair of the BOM parts below in PLA or better
BOM below is for 1 part complete, print 2 sets
Print Settings:
Infill 10 to 15%
Perimeter 4 walls
Top and Bottom 3 to 4
Enjoy
