Dual Extruder XY Calibration Quick Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a XY calibration file designed to be quick to print to make many revisions possible in a short amount of time
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
This is a XY calibration file designed to be quick to print to make many revisions possible in a short amount of time.
The two colors are printed on top of one another to only have a single tool change
The file should be very easy to read and self explanatory even after removing from the bed to take measurements and check layers. I had found some other files to be alright but always lost what axis needs adjustment after the print has been removed.
Print Settings
Printer:
Modded Kodak Portrait Duet3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
n/a
Filament:
n/a n/an/a
Notes:
Print using 0.2mm layer height. The total
model height is 1.2mm, 3 layers per
color.
When slicing, pay attention to your X
and Y axis and position accordingly on
print bed for proper orientation to
aid in diagnostics.
Category: 3D Printing Tests