Werkzeugablage/ Tool tray for Feedback Sports Ultralight - keine Schrauben nötig/ no screws necessary
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dies ist eine flexible Werkzeugablage für/ This is a flexible tool tray for Feedback Sports Ultralight
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 247
- Wydruki
- 3
- Wyświetlenia
- 1331
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Nie wieder das Werkzeug suchen, wenn man an seinem Fahrrad schraubt.
Diese Werkzeugablage für den Montageständer Feedback Sports Ultralight bietet Platz für die üblichen Werkzeuge und besitzt 3 Ablagefächer für Schrauben und andere Kleinteile. Sie ist flexibel und durch eine schraublose konische Steckverbindung extrem einfach zu befestigen. Der Adapter ermöglicht es die Ablage an die verschiedenen Rohrdurchmesser anzupassen.
Druckereinstellungen/ Printer settings:
"Klemme/ Reduzierung"
4 Perimeter
4/ 4 Solid layers - top/bottom
15% Infill Gyroid
"Ablage"
2 Perimeter
5/ 4 Solid layers - top/bottom
15% Infill Gyroid
Translation DeepL
Never again look for the tool when you screw on your bike.
This tool tray for the assembly stand Feedback Sports Ultralight offers space for the usual tools and has 3 storage compartments for screws and other small parts. It is flexible and extremely easy to attach thanks to a screwless conical plug-in connection. The adapter allows the tray to adapt to the different pipe diameters.
Hinweis/ Notice:
Der Pfeil im Teil "Klemme" muss nach oben zeigen/ The arrow in the "Klemme" part must point upwards

11.08.2023
Die ungetesteten Teile “Klemme V2” und “Reduzierung V2” zugefügt. Die Ausrichtung zueinander wird durch Nut und Feder vereinfacht.
The untested parts "Klemme V2" and "ReduzierungV2" added. The alignment to each other is simplified by tongue and groove.
13.08.2023
Die Ablage ist konstruiert für die Durchmesser 44,3 und 38,0 mm und sollte auch an andere Versionen des Montageständers passen.
The tray is designed for diameters 44.3 and 38.0 mm and should also fit other versions of the assembly stand.