Tippmann Stormer air through stock adapter.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a 2 piece adapter that goes into the Stormer's back, and hold the ASA. You will need a custom in-line tube!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 667
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
No one was made or sell it so i had to design and make my own. Here it is! Use or remix it but do not sell it!
It is a 2 piece adapter that goes into the Stormer's back replaces the buttstock, and hold the ASA. This way the HPA bottle will be your new stock just like the Tippmann TMC air trough stock kit. You will need a custom in-line tube, the stock wont fit in the channel! You can print out some shoulder taps that goes on to the HPA if you want to.
You will need:
4pc M5 screw and nuts
1pc custom in-line tube (folded into required shape) to fit into the marker's prepared channel.