1 / 1
PA Rocket Model
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A non flyable rocket
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a non flyable rocket model. Did this in FreeCAD for my son.
Print instructions
Category: Vehicles Summary
This is a non flyable rocket model. Did this in FreeCAD for my son.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
</div>Rafts:No
Supports:
Yes
</div>Resolution:0.2
Infill:
10%
</div>Filament:
Overture PETG Black
Notes:
You may print it to different sizes. I found it prints very well this way:
1) Split the cone and print it alone.2) Split the bottom (body with legs attached) and print it reversed with supports at the first angle until it reaches the first corner. That last line to the end of the legs doesn't need supports.
3) Cut the middle boddy in as many parts as you need, it's really just cylinders.
Glue it all with superglue.