Backhorn V4 for DA PC83-4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of guppyk’s very awesome V4.0 Back Horn Speakers specifically for the Dayton Audio PC83-4 driver.…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 743
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of guppyk’s very awesome V4.0 Back Horn Speakers specifically for the Dayton Audio PC83-4 driver. Basically rescaled (109.45%) to match mounting holes and added squared notches to the mount to match the DA PC83-4 (filling the gap from the round opening and square-ish driver mount).
Including the rescaled mounting ring for the DA PC83-4 as well.
Note: I used hot glue to hold the mounting nuts in place because rescaling made the recessed holders a bit looser than guppyk's original design. I also added poly-fil to help with the sound.
Using the 2.1 amp guppyk created to push the drivers: https://www.thingiverse.com/thing:4743037
THANK YOU guppyk!!!
Print Settings
Printer:
Bambu Labs X1C
Rafts:
No
Supports:
No
Resolution:
.12 Layer height
Infill:
25%
Filament:
CF Green Matcha
Notes:
Ring was printed with AMOLEN Walnut Wood PLA with Hilbert Curve and then sanded/stained.
Category: Audio