Raspberry Pi 4 Cluster Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom-designed case that holds 4 pi, network switch, and power supply. Has ample room to access USB C port and SD card.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 1944
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
WIP made several small oversights in my original design will work on a v2 version soon
This is a custom pi case I made to fit my components. I was working to make the design parametric, there are some quirks but I will still upload the fusion file in case you can improve/use it. I will upload instructions on how to modify the design if there is expressed interest.
The STL file is made to fit these parts. Has screw holes for a 120mm fan.
Note my ethernet hole over the network switch is too small.
Print top facing down
no supports needed