Articulated Goldfish
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,97 € – 2,41 € netto (bez VAT)
Dla pliku: ArticulatedGoldfish_0.2mm_PLA_MK3S_2h21m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,19 € netto (środek widełek).
- Masa podana przez autora
- 24 g
- Czas druku podany przez autora
- 2,35 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Cute articulated Goldfish
- Ocena
- 4,964 / 5
- Polubienia
- 797
- Pobrania
- 3632
- Wydruki
- 73
- Wyświetlenia
- 8995
- Oceny
- 56
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Dimensions (LxWxH)
100 x 63 x 51 mm (100% scale)
Basic information
Looking for a cute and friendly fish companion? Look no further! This Goldfish doesn't have to be fed, nor cared for, and anyone will instantly fall in love with it's cute appeal.
Files information
You can choose from total of 3 files: a .3mf , an .stl for maximum slicer compatibility, and a .gcode (for MK3S+, pre-sliced, ready to print)
This design is a part of the Articulated Sea Life collection by me. You can check out other designs from this collection here.
The Articulated Sea Life collection is a live project, and I'm continuously adding new designs, anytime I get an interesting idea, or a suggestion. The designs are also updated, if any changes or tweaks have to be made. Feedback, suggestions and ideas are welcome!
Material
PLA
Layer height
≤0,2 mm
or
>0,2 mm + variable layer height
Infill
>10%
Support
None. The model was designed not to require any support material.
Scaling
Possible, however, If your machine isn't calibrated properly, has accuracy problems, or if you're dealing with filament issues, downscaling isn't recommended. When downscaling, proceed cautiously, and don't go too small, unless you want to risk mobility related issues. When printing a downscaled version, adjust layer height in proportion to the scale.
Orientation
Default, laid flat on the belly
Adhesion aid
Not necessary, contact area with the buildplate should be sufficient. If your print surface suffers from poor adhesion, consider using some adhesive spray, or other kind of adhesion booster. Using brim is possible, but not recommended, as it would be difficult, and inconvenient to remove afterwards.
In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue was every specific update adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.
If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm.
11/30/2024 - Fixed a non-functioning link in the model description
6/5/2025 - Added a raw .stl model file to solve issues with slicer compatibility. Minor tweaks to the model description.
There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.
My work is free for personal, non commercial use. If you want to sell, or monetize my models in any other way, please visit my Patreon for more licensing options.