XTool F1 Business Card Plate / Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This business card plate holds the metal business cards in place for the Xtool F1 laser...
- Ocena
- 5 / 5
- Polubienia
- 143
- Pobrania
- 1290
- Wydruki
- 3
- Wyświetlenia
- 3551
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This business card plate holds metal business cards in place for the Xtool F1 laser…
Works with all metal business cards including the very thick 2mm+. (Most cards are 0.25 / 0.45 / 0.8mm). So, I got you covered!
Note:
> You can print this plate in any filament you want. (However, a “tough” filament is recommended)
> 15% infill , 3 walls, honeycomb pattern
**********
Other plates / jigs:
4 inch round coaster -
https://www.printables.com/model/550360-xtool-f1-4-inch-round-coaster-plate-jig
Dual leather patch -
https://www.printables.com/model/550853-xtool-f1-leather-patch-plate-jig
8oz flask -
https://www.printables.com/model/552065-xtool-f1-8oz-flask-plate-jig
***********
Like it? , please consider donating the small amount of $1 to help me with development and Design… If you own your own business and are going to use this model in your professional office / workshop / SOHO please consider donating $2 … (via: Ko-Fi ) - Thank You!
********
Looking for more XTool F1 related stuff?
Look at all my models! :)