3dpdeals Maker Coin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We've designed a 3dpdeals maker-coin, printable as a single-material or multi-material.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 45
- Wydruki
- 2
- Wyświetlenia
- 173
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
We've designed a 3dpdeals maker-coin, printable as a single-material or multi-material. This was designed to be a print-in-place fidget, but also customizable by inserting some little bits of 1.75mm filament, any color you want! Just slide filament in from the outside until it stops, then cut it off flush. It should be a tight fit that locks in place when deforming the flush cut.
Slicing tips:
If using Prusaslicer, if you get the message about it seems to be defined in inches, do you want to recalculate, choose “no”.
For the single material file, you can do a color change after 5mm to make the text pop.
For the multi material file, there is an inner section, and outer section, text on top, text on the bottom, and the site text (also on the bottom).
Feel free to check out our site for deals on 3d printing everything!