AirTag holder for Evercross EV10K PRO/EV85F ABE E-Scooters

I wanted to add some tracking functionality to my E-Scooter, and since I have an AirTag, that seemed like a good idea, so I looked for a design to help me get started. I took https://www.thingiverse.com/thing:4836701 as an inspiration and borrowed its AirTag holding mechanism.

You will need:

• 3x M.3 Threaded Inserts
• 3x 8mm M.3 screws
• 2x Nylon zip ties at least 200mm in length
• An AirTag

Only the base STL needs to be printed with support.

You don't need to overtighten the LED light screw when attaching this print to your scooter. Otherwise, the screw holder on the scooter's main shaft might come out or get a bit loose. Just apply enough pressure to keep it firmly in place.

Do you like my models? Consider buying me a coffee ;)

Print Settings

Printer Brand:

Anycubic

Printer: 

i3 Mega X

Rafts:

Doesn't Matter

Supports: 

Yes

Resolution:

0.2

Infill: 

30%

Filament: eSun PETG Black

Notes:

Since this piece will be used outdoors, I recommend printing it in PETG, ASA, or Nylon. Avoid using PLA for it as it'll degrade over time.

How I Designed This ===================

I took the original design that was for bicycles, extracted the part that holds the AirTag, and started building from there.

After taking measurements with my caliper, I did the whole thing on Tinkercad. As part of the holding mechanism, I attach this box to the screw that keeps the scooter LED light in place.

Category: Automotive