Lighthouse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created in HueForge. This is a negative version of the original model, so you start with light colors and move to dark.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 562
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
The model is not as thick as the original so some of the detail may be lost, but it prints much quicker.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Jessie White Transmission Distance: 5
PLA Jessie Design White Transmission Distance: 5.5
PLA Overture Light Gray Transmission Distance: 3.5
PLA Jessie Gun Metal Grey Transmission Distance: 1
PLA Overture Cement Gray Transmission Distance: 4
PLA Overture Black Transmission Distance: 0.5
Swap Instructions:
Start with White
At layer #6 (0.56mm) swap to Design White
At layer #8 (0.72mm) swap to Light Gray
At layer #11 (0.96mm) swap to Gun Metal Grey
At layer #15 (1.28mm) swap to Cement Gray
At layer #21 (1.76mm) swap to Black for the rest.