Airsoft/Paintball/Training TPU Rubber Knife
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rubber knife for training purposes or to be used in sports like Airsoft, Paintball or Martial Arts.
- Ocena
- 4,846 / 5
- Polubienia
- 373
- Pobrania
- 1521
- Wydruki
- 13
- Wyświetlenia
- 9192
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
***16/08/2023 added another version of the Blade.***
Hi there,
I designed this knife to be used in airsoft. Therefore, for your own safety and especially the safety of others, print the blade only out of flexible materials like TPU. Not sure if your blade is too stiff? Stab yourself very hard, if it hurts, reprint with a softer filament. I personally used 98A TPU.
There is a version of the handle made for and without usage of paracord. Print according to your likings. The sheath is designed to work using only paracord to assemble both parts.
The blade will be without our team Logo. I uploaded the Blade also as a .STEP file, so you can change the visuals of the blade itself or just put your Team Logo or Name on it. If you use a bridge to print logo, I advise to cut 0,4mm into the blade, this way the Logo will be well seen and still be on the same height as the print bed.
Any questions? Ask in the comments!
ASSEMBLY
Put Blade in between the two halves of the handle. Screw in the printed M6 Screws. Put Blade stabilizer through Handguard from the bottom. (Or download “Handguard NO STABILIZER” if you do not wish to use the stabilizer) Carefully Slide Handguard along the blade until it snaps into the handle. If you do not want to disassemble the knife anymore, put glue into the fixture of the handle to permanently lock the handle.
Paracord:
You will need 5mm Paracord in a colour to your liking. Start from the bottom of the handle, put the paracord into the hole and lay it into the groove, you will cover it with he paracord. Work your way up, use a good amount of force and make sure the paracord has a good sit on every turn. When you reached the top, put the cord through the hole, cut the length and use a lighter to melt the tip of the paracord, press it onto the cord on the grip.
Sheath:
Wrap paracord around the sheath while blade inserted. There are many ways to do this. Use cable binders to mount it onto your vest or have a loop on the backside to put your belt through.