Muzzle Thread Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A screw-on protective sleeve for a gun barrel.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 236
- Wydruki
- 2
- Wyświetlenia
- 951
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- BSD License
This screw-on sleeve is designed to protect the muzzle threads of certain firearm barrels when no muzzle device is installed. Its circumference is ribbed for grip so that it can be screwed on and off by hand. Supported thread specs are:
- 1/2"-28, commonly used for .223 Remington and similar chamberings
- 1/2"-32, sometimes used for .223 or .30-caliber chamberings
- 9/16"-24, commonly used for .40S&W, and sometimes for 6.5 Grendel
- I fitted this to a Grendel Incursion barrel by Alexander Arms.
- 5/8"-24, commonly used for 6.5 Grendel/Creedmoor and for various .30-caliber chamberings
It's not yet clear to me how this thread protector will handle the heat of the barrel under normal use, so this may very well be a pointless endeavor aside from the learning experience regarding thread specs and maximum temperatures.
The threads were generated with Dan Kirshner's Threads library in OpenSCAD, using thread diameters oversized by 0.5 mm.