No Face (Spirited Away) Plant Pot v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can be a planter, pen holder, etc.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 543
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Inspired by CalebTimoteo's planter remix of the original model and unhappy with my first attempt to improve the printability and functionality of the model I decided to remake the original from scratch in CAD. The face now protrudes much less into the inner volume and the inside lip is cleanly supported making for an easy print.
There are five small drain holes on the bottom so that the model can be used as a planter. Included are two different versions of the face insert, one has a cutout to install the highlight inserts and one does not.
All parts are already oriented for printing and should not require any special settings or supports. The highlight inserts install into the back of the face and are designed so that they can only be installed one way.