Zodiac MX6 and MX8 Pool Cleaner Swivel Assembly (REMIX by MadLabRemix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix from Thingiverse user BrianM2 (https://www.thingiverse.com/thing:5206766).
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 544
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
My Zodiac MX6 pool cleaner swivel assembly broke and the only thing available I can find on amazon is this complete set (https://amzn.to/446w9Kp). Luckily, I found the particular part I'm looking for made by BrianM2. I remixed his creation to add more strength on the neck part, made the top part slightly smaller and added 2 more cuts to make it easier to install (snap on).
I'm new to 3D printing so bear with me. HAPPY PRINTING and REMIX AWAY!!! Let me know if you have any questions.
Please LIKE if you LIKE them! Thank you!!!
This is a remix from Thingiverse user BrianM2 (https://www.thingiverse.com/thing:5206766).
| BOM TO BUY: (As an Amazon Associate I earn from qualifying purchases.) | ||
| PLA/PLA+/PETG/ABS | Kingroon | https://amzn.to/457lvnV (PLA) https://amzn.to/47qqhyr (PETG) https://amzn.to/47pMvAx (ABS) |
Notes:
- For better durability, I suggest PETG or ABS.
| BOM TO 3D PRINT: | ||
| Material Usage | Print Time | |
| Swivel Assembly | 48g (16.22m) | 4 hrs 22 mins |
Notes:
| PRINT/SLICER SETTINGS: | |
| 3D Printer | Ender 3 (Direct Drive) |
| Slicer | Ultimaker Cura 5.4.0 |
| Nozzle | 0.4mm |
| Layer Height | 0.28 |
| Walls | 3 |
| Bottom/Top Layers | 5 |
| Infill | 50% (100% is best) |
| Print Speed | 80mm/s |
| Supports | Yes |
| Adhesion Type | None |
| Support Structure | Tree |
| Print Orientation | Top Side Down |
Notes: Since it's going to be used in water and out in the sun, I recommend to print with 100% infill using either PETG or ABS (From my research, ABS can survive boiling water).
| STL FILES |
| Zodiac_Swivel_Assembly_MadLabRemix |
| GCODE FILES |
| Zodiac_Swivel_Assembly_MadLabRemix |