9-wheel Kryptex
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 9-wheel variant of Hiob's 6-wheel cryptex.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 180
- Wydruki
- 6
- Wyświetlenia
- 1543
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This KRYPTEX is a longer variant of Hiob's 6-wheel cryptex. With a billion possible combinations as opposed to a million, it's a bit harder to crack. Hence the unambiguously hard K instead of a C in the name. ;-)
Hiob's design is based on CloudJ's design, which is nicely demonstrated on YouTube.
Print Settings
Rafts: No
Supports: No
Resolution: 0.1mm for outer rings, 0.3mm for all other parts
Infill: 100%
Filament: PLA Brown, Gray, & Black
Bottom & top fill: Archimedian Chords
Perimeters: 1
Print nine outer wheels. Print one of every other piece. See which size of inner wheel fits best, then print eight more of that size.
How I Designed This
I extended parts A and B of Hiob's cryptex design by 36.6 mm to accommodate 3 more discs.
Filament Selection & Finishing Touches
I selected the following materials:
- ColorFabb™ steelFill™ filament for the decagonal endpieces of parts A and B; black PLA for the cylindrical sections
- Dark brown PLA for inner wheels
- Cherry wood PLA for outer wheels
I sanded the steel- and wood-infused parts a bit and brushed them with steel wool. This improved the appearance and lightened the color of non-recessed areas so that numerals and index marks stand out. I sanded the sides of the assembled wheels a little till they all turned easily.