Summerboard Soft Footholds
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Open source, aggressive-profile, tunable-compliance footholds for your Summerboard that you can print in normal TPU.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by Summerboard's [Foamies](https://summerboard.com/products/foamies), these are aggressive-profile, tunable-compliance footholds for your summerboard. I designed a regular (short) version and a long version assuming preferences might differ. Print in normal 95A TPU with 10% infill (gyroid) to make a very soft, compliant foothold. Or, increase to 20% infill to make a very firm foothold. My current optimal setup is a short foothold on the back for more flexibility in foot position, and a long one in the front for better lock-in. Note: These are a work in progress and may change over time.