1 / 1
Receiver and duct mod to support XINGYHENG style DC to DC booster — zdjęcie 1

Receiver and duct mod to support XINGYHENG style DC to DC booster

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Edited models to fit a different booster board than the one in the guide.

Ocena
5 / 5
Polubienia
1
Pobrania
29
Wydruki
1
Wyświetlenia
394
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

When I ordered my booster, they sent one with a mildly different layout than the one in the guide. This meant the duct and receiver box didn't fit. Edited them to fit the different board. Picture included so you can determine if you have the same board.

I only edited the 4x2 magnet version since that's what I'm using.