1 / 5
First Aid Kit Inserts for Parametric Stackable SBox
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inserts for 180x180x80 box for an indoor first aid kit. F3D files attached if you want to customize your own
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 148
- Wydruki
- 0
- Wyświetlenia
- 1764
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (84)Powiązane
180x180x80 box for an indoor first aid kit.
I printed with PLA, 2 perimeters, 15% gyroid infill, 0.2mm height.
The piece called “don't attach, mounting holder” is just a spacer to hold the shelf support in place while you glue it to the side of the box.
F3D file is attached if you want to change sizing and stuff. It's not designed for parametric editing as I made this as a one-off. But uploading here in case others want to build from it.