Barn door hook for thin wall / door attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I first printed Penskop's barn door hook from thingiverse to found out that because of the low outer wall, the hook can'
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I first printed Penskop's barn door hook from thingiverse to found out that because of the low outer wall, of the box, the hook can't be attached to the outer wall, as the bridle would otherwise be touching the ground. So I decided to hang it up from the door. As the model was intended to be used for wall thicknesses of either 40mm or 50mm, it was a bit unstable. So I designed it for 10mm wall thickness instead.
The lower hook is 36mm deep, so it can easily hold more than one bridle and rope.
total height: 120mm
hook depth's for secure hanging and attachment: 50mm
printed with PLA (47 grams).
No supports needed.
Extremely sturdy with 15% infill.
2h39m print time on the Mk4 with .2mm layer height.
If you need the wall thickness in another dimension, let me know and I'll send you the file.
Happy printing.