1 / 6
Parkside 20v Charger Skadis holder (now stronger with universal hook) — zdjęcie 1
1 / 6

Parkside 20v Charger Skadis holder (now stronger with universal hook)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A quick little remix to make the charger holder skadis compatible

Ocena
5 / 5
Polubienia
38
Pobrania
187
Wydruki
1
Wyświetlenia
1357
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

v2: Now stronger and compatible with the Skadis universal hook.

I still printed it with a stronger PLA and lots of infill but now it hold the charger with the battery pack no problem.

_____________________________________

v1: I printed it with 70% hexagon infill, 0.2 layer height and supported like in the pictures. You may get away with different settings but this way worked well for me and only took about 6.2m of filament and just under 2h to print

Print with a strong Filament! otherwise it will probably break off when you hang the battery on it (mine did :/). I'll try to add a stronger version

Tagi