Slippers Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slippers hanger to keep the floor clean from clutter for the robot vaccum
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You can print as many as you want and be able to connect them together through the bottom.
The small hook part broke at 50%, don't forget to change the settings in the files uploaded here.
Small hook part
Fill density: 100%
Fill pattern: Rectilinear
Big slipper hanger
Fill density: 50%
Fill pattern: Adaptive cubic
Bottom/Top solid layers: 3
Perimeters: 3
Support
Style: Grid
Bottom/Top contact distance: 0.1
Interface pattern: Concentric
Interface pattern spacing: 0.2
Pattern: Rectilinear
Pattern spacing: 1.5
Overhang: 30
(there probably is better support settings, cause this was hard to remove, I am still trying out different settings, please do share if you have tips)