CNC Cam Clamp Set M6 M8 screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M6,M8 side clamps for cnc.
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 406
- Wydruki
- 9
- Wyświetlenia
- 2058
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Cnc clamps and spacers for 18mm and 12mm height
Added V2 Folder. Correctly contains updated model (not much has changed just made them consistent chamfers and fillets)
Also correct M8 holes present for M8 versions.
Also all models in 1 file for one config. easier to download and use.
I have only tried the 18mm ones they worked really well for facing a few pieces of walnut.
Not sure about the amount of movement offered but i managed to use them with some spacers as well for some odd pieces.
They have the version and the thickness embossed on the right side up faces.
I would suggest using Washers with the screws to reduce the wear and tear i believe they fit a maximum of 25 mm washers. I just use 24mm ones like these:
Washers
been inspired by this:
https://www.printables.com/model/399012-cnc-cam-clamp
thank you Elphwrkz