1 / 2
Playdate magnetic charging stand 6x3mm magnets — zdjęcie 1
1 / 2

Playdate magnetic charging stand 6x3mm magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A USB magnetic charging stand for the Playdate.

Ocena
0 / 5
Polubienia
15
Pobrania
64
Wydruki
0
Wyświetlenia
698
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Share Alike

A magnetic charging stand for the Playdate.

It uses 9 6x3mm round magnets: https://www.amazon.com/gp/product/B07873ZCY4

The magnets are connected to a standard 5v USB 2.0 charging cable (red goes to the top magnet and black goes to the bottom magnet). Designed to be a press fit but you may need glue or epoxy.

To complete the setup, wrap the USB cable around the center “roundabout” piece and guide it through the bottom opening. Finally close the stand by pressing the back cover onto it (snap-on). 

The base of the stand is hollow so that you can add a stop at layer 183 to add pennies/sand/gravel to add weight to the stand.

Tagi