AeroPress XL Valve Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fellow Prismo-like a adapter for the XL
- Ocena
- 4 / 5
- Polubienia
- 15
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 1972
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
YOU MUST PRINT THIS IN COLORFABB HT!!!!
This is a pressure valve adapter for the AeroPress XL that uses replacement valves from the Fellow Prismo. In my opinion the XL version of the AeroPress is pretty lackluster without this attachment.
As far as I know ColorFabb HT is the only “food safe” filament with a glass transition point above 100° C and is absolutely necessary in order to use this attachment for coffee brewing.
When brewing with this valve adapter you may experience drips around the edges where it screws into the AeroPress but as long as you have a paper filter in place and screw it down tight you should only lose a few milliliters over the course of a 10 minute brew time.
If you'd like you can buy me a coffee here: https://www.buymeacoffee.com/junrenman