API Water Test Kit Holder & Drying Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder and drying rack for the API Water Master Test Kit
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 272
- Wydruki
- 0
- Wyświetlenia
- 1237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
Holder and drying rack for the API Water Master Test Kit.
Every model I found was either a holding rig, or a dryer - but never both.
This has room for 5 test tubes and 6 of the dropper bottles, I never test for high range PH so for the sake of symmetry I omitted it from fitting on the rack.
Rack is balanced when fully loaded. Bottles and test tubes fit snug.
The drying pins are removable as I wanted them to be replaceable if broken. The model is 9.7mm and the holes they go into are 10mm. You may need to upscale/downscale them to fit depending on your printer tolerances. I suggest printing some test ones to see what fits best!
Only print settings I changed from default is having 4 walls instead of 2.