1 / 4
Seeburg Teardrop Google Home Mini speaker
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- BSD License
Seeburg Teardrop Speaker Replica for Google Home Mini
Tips for Printing This
- Print each piece separately, flat against the bed
- Prints could be combined and printed with a multi color printer if you want, but I haven't tested it
- Triangle and circular pieces are at a slight angle so it is possible to merge the models, be sure to lay them flat if you're printing them separately
- Set support overhangs for the main body for 80 degrees so it supports the lip that the speaker rests against. No supports needed for any other pieces.
- Sand the inside tube where the speaker goes. You don't want to snag the cloth and rip your speaker.
- Use double sided tape to attach the Seeburg logo and glue to attach the ring and triangle to the main body
- Put the speaker in at a 45 degree angle and then push the extruding side down into place (fits easier than trying to push it directly down the tube).