Viper MK 1 for Minimates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BSG Viper MK 1 for Minimates. There is a factory Viper Mark VII for Minimates but the Mark 1 never got made. I…
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 498
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
BSG Viper MK 1 for Minimates. There is a factory Viper Mark VII for Minimates but the Mark 1 never got made. I previously made a Cylon Raider and wanted something for the Colonials to fight them with.
You will need the multiples of the following:
engine_insert X 2
alignment_cube X 4
alignment_cube_sm X 3
exhaust X 3
hinge_block X 2
main_body_insert X 2
landing_gear_single X 3 (optional)
left_wing X 2 (mirror one in slicer)
I print the alignment cubes at 95% for an easier fit.
Please note engine_insert_upper is a chopped version of the engine insert to allow the main body to mount flush against the engines.
The two files with -flight-mode are the same files minus the holes for landing gear.
The file viper-assembled is just to provide a 3-d preview here. I wouldn't recommend trying to print it that way.
SVGs created and editable in Inkscape. Free Software. The sticker sheet has enough for 3 vipers. There are outlines of the wing, top fin, and front panel, for sizing if you want to make your own stickers or modify.
Category: Toys & Games