Prusa MK3S BNBSX Pi Camera V1.3 Mount With X-axis Cable Protection

Based on https://www.prusaprinters.org/prints/46866-prusa-mk3s-pi-camera-v21-mount-with-optional-x-axi

I adapted the design to work with my BNBSX short ears x-axis (https://www.thingiverse.com/thing:3626993) but it should work with the standard bear x-axis.

Added x-axis motor cable protection bracket (from https://www.prusaprinters.org/prints/50387-prusa-mk3s-picam-v21-x-axis-mount-combined-with-x-) which stabilizes the x-axis-cable and camera mount at the same time.

Designed for RPi camera V1.3.

The design also includes the following upgrades:

1. Improved RPi camera ribbon cable management.
2. Pi camera cover is snap fit onto the main assembly (no screws required).
3. Optional: you can secure the RPi camera to the cover using M2x4mm screws.
4. Increased tolerance for zip tie on x-axis strain relief.

Required hardware:
1 small zip tie (2.5mm) for x-axis cable strain relief.
1 M3x16 screw to secure assembly to x-axis motor.
Optional: 3 M2x4mm crews to secure RPi camera to cover.

Print instructions

I printed all of the parts using ABS (I sometimes use a heated chamber and have had some PETG parts warp due to ambient temperature) with a layer resolution of 0.15mm. Prints mostly fine without supports but is better to add supports for overhangs on main part where the RPi camera cover is mounted and on the RPi cover top snap hook.

Printer Brand: Prusa i3 MK3s
Rafts: No
Supports: Optional (see above)
Infill: 20%
Resolution: 0.15
Perimeters: 3
Filament: ABS/PETG