Enclosure storage bins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One storage bin for each side inside enclosure
- Ocena
- 4,667 / 5
- Polubienia
- 46
- Pobrania
- 152
- Wydruki
- 3
- Wyświetlenia
- 902
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Originally thought as waste bin, on the left side, because often there is spill there. Good to have something there to catch it. And why not a whole wastebin so I made it to cover whole space.
The right one could be used for IPA and tools or such.
Just make sure you don't have something that interferes with the plate/extruder. I thought of adding dividers but that would be difficult to get to fit everyone so I skipped that part. Just be careful.
One note: The longest side of the model is just over 240mm, so you have to rotate it like the pic to print it.
====================================================================
Also check out my other enclosure mods, the top filament rollers. Too early with these so I couldn't have them in the contest, but here they are:
https://www.printables.com/model/467665-enclosure-top-roller-front
https://www.printables.com/model/467704-enclosure-top-roller-mid
