Wheel Stand 2 Portability Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A way to add wheels to the Wheel Stand 2.0 to make it easier to move around.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 127
- Wydruki
- 5
- Wyświetlenia
- 994
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wheels for the Next Level Racing Wheel Stand 2.0 to help move it around, I hear that some versions of this came with wheels, but mine did not.
This is designed to use TPU wheels, but I think you could get away with printing them in PLA.
The parts you need for this design are
M8 X 20 = 4
M8 X 40 = 2
608 bearings = 4
Print the brackets with support as show in the print bed pictures.
I designed the holes in the wheels to not need support if printed in .2 layer height, bigger layer heights will screw up the self supporting holes.
The TPU settings I used are
.4nozzle, .2 layer height, 3 perimeters 30% infill.