1 / 3
Aluminium Y Carriage and Bed for Wilson TS — zdjęcie 1
1 / 3

Aluminium Y Carriage and Bed for Wilson TS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I wasn't satisfied with my MDF Y-Carriage and made a simple Aluminium replacement. Also include a Simple Aluminium Bed…

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
97
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I wasn't satisfied with my MDF Y-Carriage and made a simple Aluminium replacement. Also include a Simple Aluminium Bed Plate.

You will have to set Y home offset (M206) as it hit the Y home button a bit further than the original (personal preference).

You'll need 4 SC8UU or LM8UU holder (http://www.thingiverse.com/thing:1172217).

I'm using the LM8UU holder with great success. You could also zip tie LM8UU, but that might may not fit on a Wilson TS since the bed will hit the Y ends.

Middle section fit the old Wilson TS Y Belt holder or use this part http://www.thingiverse.com/thing:966138/#files

Note : Don't mind the "Tazified" Wilson TS on the photo, it use the same Y system :)

Post-Printing

You will have to tap M3 thread in the Y-Carriage or drill the corner holes bigger and use lock nut.

Category: 3D Printer Parts

Tagi