1 / 7
Ranger EX and Quanum Observer better wheel hubs — zdjęcie 1
1 / 7

Ranger EX and Quanum Observer better wheel hubs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ranger EX and Quanum Observer better wheel hubs - Updated

Ocena
0 / 5
Polubienia
0
Pobrania
14
Wydruki
0
Wyświetlenia
110
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

Edit - Added V2 with better support on the sides and slightly better fit to prevent the wheels from wiggling in place.

Replacement wheel hubs for the main gear of the Ranger EX from voltanex. The original hubs are pretty soft and weak and will spin in place after wearing. These use tabs matched to the foam to prevent spinning.

Recommend scaling to 102% for ABS and using 30% infill or more.

Final assembly should have the lock nut on the outer side of the landing gear, with the spacer included in the STL placed between the new hub and metal gear mount. I greased the inside of the hub, the spacer, and the sides of everything using silicon grease. If the hub is tight around the bolt,you can shave it to the perfect size by threading the bolt through a little at a time and "sawing" with it.

A future revision may see the outer rim expanded to hold the wheel better and help it track a tad straighter.