Christmas Tree Star With LED holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3d printed Christmas tree star to save the holidays.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Public Domain
-use 5mm LEDs
-solder LEDs in you preferred way (I did mine by having the outer rank of led wired in parallel with each other then to a Arduino port. Then the middle rank wired in parallel and put into another Arduino port. Then the single center LED wired to the board directly.)
-Throw an Arduino nano or similar into the back. Write some basic LED scripts. Plug in and sing some Christmas Carols.
Supports may be necessary as the gap in the middle is quite large for some printers.
Printed on an ENDER 3 with some support in the middle.
ARDUINO LED TUTORIALS here