1 / 3
Prusa MK3 MK4 Power Supply (PSU) Enclosure Mount Brackets — zdjęcie 1
1 / 3

Prusa MK3 MK4 Power Supply (PSU) Enclosure Mount Brackets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount the black PSU onto the side of an enclosure for accessibility.

Ocena
4,929 / 5
Polubienia
52
Pobrania
299
Wydruki
18
Wyświetlenia
2803
Oceny
14

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This model mounts the Prusa black PSU to the side of an enclosure that is flush with a surface and doesn't require the area in the back. I've used this on a MK3 and MK4 black PSU (they appear to be the same supply).

The top bracket is not required to be affixed to the supply so when you lift the top of the enclosure, the power supply will stay in place (and tip slightly outwards). If you want to secure it, print the optional clip.

The bottom bracket has a passthrough for the power cable so make sure to guide that through before affixing to the enclosure. Then mount the PSU and guide the cables in the tray.

Don't use supports on the bottom bracket, but maybe use a brim!

Tagi