Carrera Slot Car Track Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made these after getting frustrated by other solutions when I wanted to run track directly above other track.
- Ocena
- 0 / 5
- Polubienia
- 62
- Pobrania
- 500
- Wydruki
- 0
- Wyświetlenia
- 2650
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The high version is tall enough for the Carrera tow truck to race under - I don't know if the trucks with rear wings will fit. Both straight and curved track will fit between the uprights. For this version I recommend printing it on its side which avoids supports and adds strength to the small uprights on top.
The smaller models are narrower and are designed to fit entirely under the track. These can be printed top-down and you'll probably get 4 to a plate.
I printed these in Elegoo PLA with a 0.6 head, .0.3 layer height and 15% infill. Let's be honest, a shape like this is going to print no matter what your settings are.