Low Poly Czech Republic (Česká republika, CZ)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Czech Republic
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 119
- Wydruki
- 1
- Wyświetlenia
- 806
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Low Poly edition of the Czech Republic (CZ)
Marker pins can set in place by heating the pin up with a lighter for a few seconds before pushing the marker into the map.
In this model all elevations are square root scaled to reduce high elevation outliers and enhance low elevation detail. Find the higher resolution topo map models in USA of Plastic collection here.
| File | Description |
|---|---|
| cz-03.3mf ⭐ | Low Poly CZ |
| cz-05.3mf | 2x more detail CZ |
You can scale the model up or down as needed to fit your printer size, the final map's scale will just be scaled accordingly. E.g. 200% scale on a previous scale of 0.4mm:1000m results in 0.4mm:500m
Download the optimized Cura print settings profile for topo maps here.
| Cartographic Specification | Value | Notes |
|---|---|---|
| Projection | Lambert Conformal Conic | |
| Horizonal Scale | 1:250000 (0.4mm:100m) | Effective resolution is 40km x 40km |
| Vertical Scale | No linear ratio due to square root scale | Vertical exaggeration is ~875x. Elevations are scaled on a square root scale to eliminate outliers at high elevation and bring out more detail at low elevation. |
| Maritime Boundary | N/A |
Data: NASA, USGS, Stanford