1 / 3
Screw On Poop Chute with Bin Bambulab P1S, P1P — zdjęcie 1
1 / 3

Screw On Poop Chute with Bin Bambulab P1S, P1P

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple screw-on poop chute for Bambulab printers with a bin to collect excess filament.

Ocena
5 / 5
Polubienia
52
Pobrania
747
Wydruki
3
Wyświetlenia
4672
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

For a pre sliced version visit the makerworld version. Copy the following onto the end of regular link to find it - models/17484#profileId-16249

Screw on poop chute designed for P1P and P1S (unsure but probably works with X1). Uses a small bin at the end of the chute that can sit on a desk to collect excess filament. I created it as I didn't want to attach a chute using magnets but also didn't want it to be too hard to remove the excess filament when it had built up.


I used 2 M3x12mm screws to attach it where the chute normally attaches to the back of the printer.

Fusion360 files are provided.

Tagi