Print-in-Place Pixel Panel with Stand from Unique customizable pixel box on desk v.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Loved the Print-in-Place Panel but the Stand from the Unique customizable pixel box on desk v.1 was nicer.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a challenging print in that the clearances are tight and the little pivot pins are tiny.
I printed the Display two times because a little drop from my uncleaned Nozzle felled onto Layer two and these Pixel where not rotatable. The other time i was to fast cracking the pixels free and needed to replace one with the trash from the misprint .. everything else then an easy print.
Print with 0,2mm and 0,4mm Nozzle, keep an eye on the flow rate while printing, in the case of the display it is better to have a liitle bit to low flow rate then a to high one.
The Print-in-Place Pixel Display was just such a great Idea, but i wanted the stand from the other project, happy remixing, making the stand wider, “glueing” the outer parts of the original display on the outer edges of the Print-in-Place. Ready!
Don't forget to have a look at the original Print-in-Place printing instructions!
https://www.printables.com/de/model/532242-print-in-place-pixel-panel/files
Happy printing!