Arleigh Burke Destroyer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ready-to-print mini destroyer with holes for magnets. Put it on a fridge, dry erase board (magnetic), map, etc.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 345
- Wydruki
- 0
- Wyświetlenia
- 1642
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Plug-and-play for a resin printer. Remixed the original to integrate magnets for use on a map, fridge, cubicle shelf, etc.
Uploaded a mix of files:
- All are hollowed with drain holes.
- All have holes for magnets 6mm x 2mm (obtained from Amazon)
- Pre-supported (Lychee and STL); designed to be easily pulled off before curing*
- No supports (STL)
One file uses the entire build plate (24ea DDGs) of an Anycubic M3 Max. Otherwise, uploaded files for a single DDG with and without supports.
*Highly recommend using a mix of resin to prevent the mast from breaking when removing supports. I used SUNLU 2000g ABS-Like Resin mixed with Siraya Tech Tenacious. Just added Tenacious to a new SUNLU container, but left some air gap for mixing (vigorously shaking the sealed container).
M3 Max Settings:
Burn In:
Layers - 6
Exposure Time - 45s
Normal Layers:
Thickness - 0.05mm
Exposure Time - 4s
Lift Distance - 3mm > 7mm
Lift Speed - 150mm/m > 600mm/m
Retract Speed - 600mm/m > 150mm/m